TOP sale product

Kindly Notes:we don’t surggest the switch will be connect wireless camera,and all product can support PAL or NTSC 

,but don’t support PAL and NTSC at the same time. 

Product Description

4 channle Panoramic Image System four views recorder and Overall Monitoring Traffic Recorder Perfect Combination

it can support max.64G TF

you can select single control box or control box add 4 cameras

important TIPS

Custom settings method

Set the dial switch different state (corresponding to different functions of memory), then press the line key at the same time to power on,  power after about 2 seconds can loosen the line key, select the display mode, then you can set off memory function. The following is kinds of description:

1. dial switch 5 on the top, 1-4 in the bottom, set the boot screen for 田 mode.

2. dial switch 1, 2 on the top, 3-5 in the bottom, set the machine boot, do not enter the standby mode (5 seconds after the boot into the standby function canceled) memory.

3. dial switch 1,3 on the top, other dial switch in the bottom, set the left and right trigger line can be directly switched on and triggered, exit 3 seconds off.

4. dial switch 2,3 on the top, and other dial in the bottom, set the left and right images automatically trigger return time of 10 seconds (Note: When 2 trigger lines are triggered at the same time, the corresponding video channel of the later trigger line displays the automatic image screen after 10 seconds.).

5. dial switch 1,4 on the top, and other dial in the bottom , set the button defined as short press open screen, remember the current screen mode (please use remote control screen mode), again short to standby.

Set the triggered display mode:

6. dial switch 1 in the top, 2-5 below, set 1 trigger line trigger display mode. (please use the remote control to switch the multi screen mode you need. After the power failure, the trigger line 1 will display the current picture mode.)

7. dial switch 2 on, 1,3-5 below, set 2 trigger line trigger display mode. (please use the remote control to switch the multi screen mode you need. After the power failure, the trigger line 2 will display the current picture mode.)

8. dial switch 3 on, 1-2,4-5 below, set 3 trigger line trigger display mode. (please use the remote control to switch the multi screen mode you need. After the power failure, the trigger line 3 will display the current picture mode.)

9. dial switch 4 on the top, 1-3, 5 in the lower, set 4 trigger line trigger display mode. (please use the remote control to switch the multi screen mode you need. After the power failure, the trigger line 4 will display the current picture mode.)

Set the line key, touch switch, short press display mode:

Line key, touch switch, short press, toggle, CH1, CH2, CH3, CH4, and 田 picture loops (such as no video, skip directly)

10. dial switch 1 in the bottom, 2-5 in the upper, set short press first picture mode. (in this case, please use the remote control to switch the screen mode you need. After the power is switched off, the switch is short, and the mode will be displayed for the first time. If ch1 does not have video, this mode will skip directly)

11. dial switch 2 in the bottom, 1,3-5 in the upper, set short press second picture mode. (in this case, please use the remote control to switch the screen mode you need. After the power is switched off, the switch is short, and the mode will be displayed for the first time. If ch2 does not have video, this mode will skip directly)

12. dial switch 3 in the bottom, 1-2,4-5 in the upper, set short press third picture mode. (in this case, please use the remote control to switch the screen mode you need. After the power is switched off, the switch is short, and the mode will be displayed for the first time. If ch3 does not have video, this mode will skip directly)

13. dial switch 4 in the bottom, 1-3,5 in the upper, set short press fourth picture mode. (in this case, please use the remote control to switch the screen mode you need. After the power is switched off, the switch is short, and the mode will be displayed for the first time. If ch4 does not have video, this mode will skip directly)

14. dial switch 5 in the bottom, 1-4 in the top, set a short press fifth display screen mode. (in this case, use the remote control to switch the picture mode you need. After the power is switched off, the touch switch is short, fifth times will show this mode)

How to erase memory patterns

15. Dial the switch 1-5 below, clear all memory modes, and restore the standard function.

(In order not to affect the transport speed,we will not place the battery

because It is difficult to pass security checking for prodcut battery,if you need the battery , please contact us)

 below is about default four car cameras(if you have special requirement.please contact with us)

There are 7 colors for TY360 camera ,default color is black, if you want other color,please have to leave message.

Camera’s Specification:

Control box Technical parameters

Panoramic intelligent traffic recording systems

User’s Manual

Ⅰ.Instructions

( 1)Before using TF card format: TF card is inserted, power boot into POST mode (display automatically turns off after five seconds into standby) by remote control Button is on, press ESC or Stop recording (The default boot automatically start recording), press the “MENU” button to enter the first page of the menu, press again to switch SETUP menu page, select FORMAT, press the “REC or “,Press the left and right buttons to select EXECUTE, press “ESC or ” Formatting.

( 2 )Modify the system date and time: Press the “MENU” button to enter the menu, press the switch to the SETUP menu page, select DATE INPUT again, press “REC or “Key to enter the interface, press the “left” or “right” key to switch to the SET, press “REC or “Button to enter the date and time by switching the left and right, press” MENU “button to confirm and switch, press” REC or “Button to confirm, press the” MENU “to exit.

( 3 ) Playback: Press “ESC or “Stop video playback again, press” “Key to enter the Playback menu, press the “left” or “right” button to select the video file, press “REC or “Button to select the playback, press the” MENU “button to fast forward.

P.S.Blue background is selected, the yellow background is not selected.

Ⅱ.Parking Monitor Description

Parking monitoring starting voltage must be greater than 12.5V (car batteries generally 13-14V), then the battery power, and a fifth DIP switch to dial up sign Parking REC
This product has a power loss protection, voltage less than 11.5V off automatically enter the sleep state, when the voltage is restored back to normal will automatically open parking video surveillance state.

Ⅲ.Frequently Asked Questions
Question 1: SMD Tact switch function?
A: Long press (more than 1 second), the device starts to work, automatic image display screen (the default screen is H), long press again, the device enters the standby state; (Note: Press 1 second, the device starts, but Car navigation display screen response time takes about 1 second.)
Short press (less than 1 second), single-screen and “field” screen to cycle;
Question 2: 4 trigger lines how to wire?
A: Line 1 (Green) is a front view of the trigger wire, before the next depending on the assist lamp or other neutral switch place; the 2nd line (white) left, as the trigger line, then turn left positive light; the 3rd line (yellow) to reversing trigger line, then reversing light positive; Line 4 (blue) to the right, as the trigger line, then turn right at lights positive
Question 3: How to connect car navigation screen?
A: The device video output line connected car navigation screen, reverse video input port, the red line equipment output port connected to the reversing vehicle navigation screen test line, some car navigation screen video input is automatically detected, so reversing the test line can be removed.
Question 4: Why is there no output device?
A: Please check whether the device POWER Power lamp blinks, and if yes, then the device into standby mode, the output is off, press the power switch on the remote control or press the patch trigger switch device is turned on, POWER light long bright, video output device.
Question 5: Why dial left or right turn lamp lights, equipment no image?
A: The equipment in standby mode, dial left or right turn lamp lights, is not shown, because the normal driving, the driver will often toggle turn signal, if activated every time the screen display, it will affect the driver’s driving safety a. If you intend to observe the situation around, press and touch switch or remote control to open the key.
Question 6: about the camera connected to where?
A: The camera can be connected at the bottom of the rearview mirror, you can monitor the front direction, because the left and right front wheels are usually dead, rear wheel rearview mirror, the normal camera monitoring is not required.
Q 7: power input line device connected to where?
A: Red power cable ACC (ie car ignition point), black ground (or Ground). As signs Parking REC, red power cable can be connected to the car battery positive (Note: the 5th DIP switch to the top).

NOTE: Power Led, when energized, the lights lit; when the system enters standby mode, the power light flashes. Status status lights, video flashes, when not recording continuously. This product is the normal input voltage 9V ~ 36V (the parking monitor is 12.5V ~ 36V).